sorry for the delay............
Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”
Use of Dealer Scan Tool is needed to Program, as there is NO Customer Programming
Each FOBIK has a unique ID code that is assigned at the time the key is manufactured. When a key is programmed into the WIN, the module learns the transponder ID code and the transponder acquires the unique Secret Key ID code from the WIN.
CAUTION: Read all notes and cautions for programming procedures.
1.Connect a battery charger to the vehicle.
2.Connect the scan tool.
3.Have a unique vehicle PIN readily available before running the routine.
4.Ignition key should be in RUN position.
5.Select "ECU View".
6.Select "WIN Wireless Control".
7.Select "Miscellaneous Functions."
8.Select "Program Ignition Keys or Key FOBs", Start
9.Enter the PIN when prompted.
10.Verify the correct information.
11.Cycle ignition key after the successful routine completion.
NOTE: If the original keys do not successfully program to the new WIN after the proper procedures are followed correctly, programming new keys will be necessary.
NOTE: A maximum of eight keys can be learned by the WIN. Once a key is learned by a WIN, that key has acquired the Secret Key for that WIN and cannot be transferred to any other WIN or vehicle.
IF you need more information, please ask "prior" to Rating.
The way it works:
Once an answer is given, "you" as the customer, are expected to "RATE" the answer as you agreed to do.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
Rating is very Important to our Service