How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7513
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I want to disable the front park sensors on 2016 dodge ram

Customer Question

i want to disable the front park sensors on 2016 dodge ram bighorn
Submitted: 7 months ago.
Category: Dodge
Expert:  -Brad- replied 7 months ago.
Good evening and welcome to JustAnswer!!!Did you ask this same question this morning? Just making sure it's not a duplicate.
Expert:  -Brad- replied 7 months ago.

Enabling And Disabling Front And/Or Rear ParkSense

Front ParkSense can be enabled and disabled with the Front ParkSense switch.

Rear ParkSense can be enabled and disabled with the Rear ParkSense switch.

When the Front or Rear ParkSense switch is pushed to disable the system, the Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID) will display the “PARKSENSE OFF” message for approximately five seconds. Refer to “Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID)” in “Understanding Your Instrument Panel” for further information.

When the gear selector is moved to REVERSE and the Front or Rear system is disabled, the EVIC/DID will display the "FRONT PARKSENSE OFF" or "REAR PARKSENSE OFF" message for five seconds, followed by a vehicle graphic with "OFF" in the corresponding side. This vehicle graphic will be displayed for as long as the vehicle is in REVERSE.

NOTE:

Arc alerts from the enabled ParkSense system, will interrupt the five second messages, and the EVIC/DID will display the vehicle graphic with the corresponding arcs and "OFF" message.

The Front or Rear ParkSense switch LED will be ON when Front or Rear ParkSense is disabled or requires service. The Front or Rear ParkSense switch LED will be OFF when the Front or Rear system is enabled. If the Front or Rear ParkSense switch is pushed, and the system requires service, the Front or Rear ParkSense switch LED will blink momentarily, and then the LED will be ON.

If you need anymore assistance feel free to reply and don't forget the RATING before leaving the site!!

Have a great day,

Brad

Expert:  -Brad- replied 7 months ago.

Do you need more help? Don't forget the rating!!!