How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Dodge
Satisfied Customers: 18390
Experience:  ASE Master 15+ years
13574682
Type Your Dodge Question Here...
George H. is online now
A new question is answered every 9 seconds

How do I remove the tensioner pulley assembly. It has no

Customer Question

How do I remove the tensioner pulley assembly. It has no spring and will not hold the belt tight
JA: Which belt is acting up? And when was it last changed? What is the model/year of your Dodge?
Customer: 2006 dodge Durango 3.7 v6
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have the belt off and the upper pulley off but can't figure out how to remove the assembly to replace it
JA: Anything else you think the mechanic should know?
Customer: I just need to know where there correct bolt is to take it apart
Submitted: 3 months ago.
Category: Dodge
Expert:  George H. replied 3 months ago.

Hello I will help,

Sounds like the spring has snapped out of position, replace the assembly with the procedure below

Click here for procedure

let me know how I can help

Thank you