How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Dodge
Satisfied Customers: 2284
Experience:  Owner at Carolina Auto Service &Sales , 20 years Experience in Foreign & Domestic vehicles
45790705
Type Your Dodge Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

I have a 1991 Dodge Dynasty Le. And it stopped cranks ok. I

Customer Question

I have a 1991 Dodge Dynasty Le. And it stopped cranks ok. I have a new battery and have just replaced the alternator. So like i was saying it cranks but won't turn over. So I took it to a mechanic who told me that it needed a PCM. And he told me that it would cost $300 for the part and $200 for the labor. So it would cost $500 in total. I think that it to much money. Can you help me. Is it too much!!
Submitted: 6 months ago.
Category: Dodge
Expert:  Chad Farhat replied 6 months ago.

Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be posting a reply ASAP

Customer: replied 6 months ago.
I have a 1991 Dodge Dynasty Le. And it...
I have a 1991 Dodge Dynasty Le. And it cranks ok. I have a new battery and have just replaced the alternator. So like i was saying it cranks but won't turn over. So I took it to a mechanic who told me that it needed a PCM. And he told me that it would cost $300 for the part and $200 for thelabor. So it would cost $500 in total. I think that it to much money. Can you help me. Is it too much!!
Expert:  Chad Farhat replied 6 months ago.

http://store.allcomputerresources.com/chrysler.html or call 1-***-***-**** be best since it is a 1991 model and will have to mail yours in and they rebuild it

you can buy the pcm , at allcomputerresources.com for $169

and the labor should be only 0.5 labor it is not even 1 hr to do it

so his price is to much for 500, should be more 275 325 range.

-----------------------------------------------------------------------------------------------------------------------------------------------

This is list price for OEM dealer pcm , if you have a 2.4 liter

1991 Dodge Dynasty L4-153 2.5L SOHC

Save Article

Parts InformationOEM Part #Price

Engine Control Module

Engine Control Computer

R4672526 $204.00

Contact Dealer for most current part and price information

Labor InformationSkill LevelMfg. WarrantyStandard

Replace

A 0.3 0.5 labor hour

© 2016 ALLDATA, LLC. All Rights Reserved. Terms of Use (Version 2.0.13801)

-----------------------------------------------------------------------------------------------------------------------------------

This is if you have a v6 model

1991 Dodge Dynasty V6-181 3.0L SOHC

Save Article

Parts InformationOEM Part #Price

Engine Control Module

Engine Control Computer

Federal

(###) ###-####$420.00

Contact Dealer for most current part and price information

California

(###) ###-####$540.00

Contact Dealer for most current part and price information

Labor InformationSkill LevelMfg. WarrantyStandard

Replace

A 0.3 0.5 labor hour

Please let me know if that work for you

Thank You

Chad Farhat

ASE Certified Technician

Expert:  Chad Farhat replied 6 months ago.

Let me know if you need anything else on it, just reply back here and we will continue .

if you are good , Please Kindly rate me.

Hope I was helpful to you

A Positive Rating is Much Appreciated

This Post Will Stay Open for You To Come back and Ask me Any Follow Up Question You May have on this issue , even after you rate me

Thank You

Chad Farhat
ASE Certified Technician