How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, ASE Certified Technician
Category: Dodge
Satisfied Customers: 743
Experience:  Senior Technician
84449473
Type Your Dodge Question Here...
Gary is online now
A new question is answered every 9 seconds

I have changed the camshaft sensor(pickup coil)and the

Customer Question

I have changed the camshaft sensor(pickup coil)and the crankshaft sensor,I have checked for ground, continuity,and amps.The sensors check good as the ones I put on but it will not run until I change the pcm.
Submitted: 3 months ago.
Category: Dodge
Expert:  Gary replied 3 months ago.

Hi there,

Sounds like you have already proved your PCM is the fault.

I'm wondering why you have asked this question.

Is there still something wrong?

Gary

Expert:  Gary replied 3 months ago.

Hi again,

Do you need any further help?

I hope my advice has been of assistance to you.

Kind regards

Gary

Related Dodge Questions