How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Dodge
Satisfied Customers: 33447
Experience:  ASE Certs
7276279
Type Your Dodge Question Here...
Ron is online now
A new question is answered every 9 seconds

I just got recall finished on my dodge 09 and now I;m

Customer Question

i just got recall finished on my dodge 09 and now I;m receiving a esp anti lock error
JA: How many miles are on the car? Do you have scan tool or a code reader?
Customer: 109,000 no I don't have a coder
JA: What is the model of your '09 Dodge?
Customer: sxt
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: doing research so far but my next step is to contact dealer because I don't think its a coincedense
JA: Anything else you think the mechanic should know?
Customer: no like I said I had 5 recalls completed from wiring harness, something about ignition to the key fobs
Submitted: 3 months ago.
Category: Dodge
Expert:  Ron replied 3 months ago.

Hello, my name is ***** ***** I am a professional here at Justanswer. Thank you for your question and I will assist you with your concern.

These warning lights come on when the computer system sees a fault and when this happens the computer will detect it and set and store a fault code and or codes. In order to determine what is failing you are going to need to start first with having the system scanned and the fault code and or codes retrieved. Since you just had some work done then you are correct in taking it back in and having them recheck there work as it may very well be related to something they did. If not then get the scan done and I will advise from there.

Customer: replied 3 months ago.
ok, will do
Expert:  Ron replied 3 months ago.

Post back if need be and we can work from there.

Customer: replied 3 months ago.
currently have at dealer awaiting word.
Expert:  Ron replied 3 months ago.

Okay post back if I can help you with this and we can work from there.

Customer: replied 3 months ago.
the dealer said they got a code for an inop idicater for the bas etc light. so they replaced the switch bulb for the indicator. Well that did not work. now they are trouble shooting again.
Expert:  Ron replied 3 months ago.

Do you know what the fault code and or codes there getting?

Customer: replied 3 months ago.
It just know it said the problem was an in op swith to the sensor.
Expert:  Ron replied 3 months ago.

If you can get the actual code I will research it for you and see if we can find the cause.