How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7511
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I have replaced the trottle body and the air intake

Customer Question

Hi I am Stephen.I have replaced the trottle body and the air intake sensor,and the red light with 2 vertical lines and a lightening bolt in the middle is still showing up.I have scanned it and I got p0507 code,which is to fast and idle.How do I fix this.
JA: Just to clarify, what are the exact lights you're talking about?
Customer: This is a warning light on the dash board .2 vertical lines with a lightening bolt in the middle of the lines.
JA: What is the model/year of your Dodge?
Customer: Caliber 2008 SXT.
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have replaced the Throttle body and the air intake sensor.
JA: Anything else you think the mechanic should know?
Customer: The car is idling a little rough.
Submitted: 7 months ago.
Category: Dodge
Expert:  -Brad- replied 7 months ago.

Good afternoon and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

Did you relearn the ETC with a scantool? If not it will not run correctly until the throttle body is recalibrated.

Customer: replied 7 months ago.
I will give this a try and let you know how it works.
Expert:  -Brad- replied 7 months ago.

Yes the ETC when replaced must be relearned or you will have a dead pedal. I use the Witech scantool here at the dealership to relearn the ETC..

If you need anymore assistance feel free to reply and don't forget the RATING before leaving the site!!

Have a great day,

Brad