How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, ASE Certified Technician
Category: Dodge
Satisfied Customers: 1655
Experience:  Auto Technician
94707146
Type Your Dodge Question Here...
Dan is online now
A new question is answered every 9 seconds

I have a 2006 dodge charger 2.7 liter, it starts then dies

Customer Question

i have a 2006 dodge charger 2.7 liter, it starts then dies
Submitted: 10 months ago.
Category: Dodge
Expert:  Dan replied 10 months ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you out with your question.

Expert:  Dan replied 10 months ago.

Have you checked you fuel pressure?

Customer: replied 10 months ago.
38psi
Customer: replied 10 months ago.
No its around 50 psi
Expert:  Dan replied 10 months ago.

Any codes?

Customer: replied 10 months ago.
No codes
Customer: replied 10 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Dan replied 10 months ago.

Cam sensors are a common problem and could cause the engine to stall. Unplug the MAF sensor and see if it will stay running.

Customer: replied 10 months ago.
I tried that and it didn't work, same results
Expert:  Dan replied 10 months ago.

Unplug the cam sensor and see if it stays running.

Customer: replied 10 months ago.
I tried that and it still dies
Expert:  Dan replied 10 months ago.

Do you have good voltage? charging and battery?

Customer: replied 10 months ago.
Expert:  Dan replied 10 months ago.

Do you have a rpm signal on the scan tool?

Customer: replied 10 months ago.
I do
Expert:  Dan replied 10 months ago.

Any codes in any module? have you done an all system scan?