How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1751
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Got 2004 dodge ram 1500 4door hemi...A/c not working...fuses

Customer Question

Got 2004 dodge ram 1500 4door hemi...A/c not working...fuses and relays where checked all good..no power to ac compressor..and if we jump pressure switch ..car shuts off....has code for evap core temp sensor replaced that still not working??
Submitted: 5 months ago.
Category: Dodge
Expert:  Ron replied 5 months ago.

Hello, my name is ***** ***** I am a professional here at Justanswer. Thank you for your question and I will assist you with your concern.

Can you give me the actual fault code your getting?

Is the system fully charged ?

Customer: replied 5 months ago.
p0533....p0532.....po645...p2122...p0642...p0533...and we don't know if it is fully charged
Expert:  Ron replied 5 months ago.

Okay before you start chasing these codes can you install a set of Ac gauges and read the pressure. A full system with the AC compressor not running should read 100 to 110 PSI on both the high and low sides. Let check this first.