How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag, Tech and Instructor
Category: Dodge
Satisfied Customers: 6701
Experience:  Since 1975
Type Your Dodge Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

I have a 2006 dodge ram with a 5.9 diesel and it keeps

Customer Question

I have a 2006 dodge ram with a 5.9 diesel and it keeps throwing a p0341 camshaft sensor code I had the camshaft sensor replaced in Phoenix this winter still thru the code so they replaced the wiring harness from the camshaft senor to the ECM, still thru the same code then I was told I needed a new ECM to the tune of around $3000. Drove it back to NE had another mechanic look at it he put diagnostic equipment on it and he said I needed a ECM . Today I had the new ECM installed at a dodge dealer in seward NE went to drive away and the check engine light came on it thru a p0341 code again What the hell can it be?
Submitted: 2 months ago.
Category: Dodge
Expert:  rpmdiag replied 2 months ago.

Hi, welcome to Just Answer. I’m Ron and I’ll be helping you
Before we get started though, Please understand that I don't know
your skill level or tools you have to assist us. Also understand that
I can't see, smell, hear, or touch the vehicle either, so patience is
appreciated. JA is a great Q/A site, but it does NOT replace a
repair shop.
My goal is to make you happy and get a great rating in return for
my time. Sometimes I have to give you bad news that I know you
didn’t want to hear, so please don’t shoot the messenger.

Very frustrating to say the least. I checked All data only to find nothing related to that. BUT, You changed the cam sensor and computer, so what may be left is a wiring issue. It does say "circuit range performance" so we need to check the connections and wiring from the sensor and PCM for signal, ground and signal return. You can use your DVOM for this task.

Thanks, Ron

Related Dodge Questions