How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1740
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Ok I need some assistance please

Customer Question

Ok I need some assistance please
Submitted: 4 months ago.
Category: Dodge
Expert:  bill replied 4 months ago.

what assistance do you need

Customer: replied 4 months ago.
I have no power off PCM pins 28, 30RPM not working on clusterABS, brake light SRS light on
Expert:  bill replied 4 months ago.

ok i need more info

what codes do you have

what is the year make and model of the vehicle

i will likely need the vin as well

Customer: replied 4 months ago.
verified VSS output AC turning by handverified incorrect power at DLC violet/brown wire 700-800
Customer: replied 4 months ago.
2000 Dodge Durango 5.9L
SLT
Expert:  bill replied 4 months ago.

i need the codes you have and the vin

Customer: replied 4 months ago.
cluster codes 950. 999
Customer: replied 4 months ago.
brb I will get vin
Expert:  bill replied 4 months ago.

the more info you give the better i can assist

Expert:  bill replied 4 months ago.

where are those codes coming from they ARE NOT valid dodge codes

Expert:  bill replied 4 months ago.

you need a proper can tool to get the correct fault codes we NO LONGER display codes through the cluster and NEVER did any codes except engine codes

Customer: replied 4 months ago.
VIN 1B4HR28Z21F511244codes retrieved from self diag mode for cluster
Expert:  bill replied 4 months ago.

those codes are meaningless unless you're the design engineer, you need to use a scan tool to pull the codes

Customer: replied 4 months ago.
No DTCs found. WHen I scanned it
Customer: replied 4 months ago.
ODB CAN enabled scan tool
Expert:  bill replied 4 months ago.

what warning lamps are on on the dash?

Customer: replied 4 months ago.
ABS, Brake light, SRS
Expert:  bill replied 4 months ago.

then there are definitely faults stored in EACH module

is your scanner able to access the ABS and AIR BAG modules NOT ALL consumer level scanners can do this MOST will only retrieve engine codes

Customer: replied 4 months ago.
No. It does not have that ability
Expert:  bill replied 4 months ago.

without the codes you are guessing

i need the codes to assist many parts stores have a rental program and you can borrow or rent a proper scan tool to get the codes

Customer: replied 4 months ago.
PCM connector C3 shows it should have CCD volatge at pin 30
Customer: replied 4 months ago.
PIN 30 voltage is .222 with other lead grounded chassis
Expert:  bill replied 4 months ago.

again NO EXPERT can help without the codes and your playing with the pcm WHEN YOU HAVE ABS and AIR BAG lights on wrong modules you need to be at the ABS module and NEED CODES to properly repair the truck

Customer: replied 4 months ago.
any recommendations for scan tools that I can buy without buying a OTC genisis
Expert:  bill replied 4 months ago.

like i said rent one from the parts store autozone or advance auto have a rental program and USUALLY higher end scan tools

Customer: replied 4 months ago.
I will look into it.
Customer: replied 4 months ago.
Thank you.
Customer: replied 4 months ago.
I did the best I can.
Expert:  bill replied 4 months ago.

it's impossible to diagnose any modern cars without a good scan tool to pull codes and read data code readers have their place but with up to 50 different computers in a newer vehicle a good scan tool is a necessity

Related Dodge Questions