How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1740
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

No spark after cylinder head replacement

Customer Question

no spark after cylinder head replacement
Submitted: 4 months ago.
Category: Dodge
Expert:  cloe0626 replied 4 months ago.

are you getting spark on any cylinder

Customer: replied 4 months ago.
no spark at all there is 12 volts on middle wire of 3 prong clip to coil . I changed coil. I also changed crank sensor and it has signal to pin 32 on ecm.There is no switching signal from pcm to coil.

Related Dodge Questions