How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Dodge
Satisfied Customers: 18308
Experience:  ASE Master 15+ years
Type Your Dodge Question Here...
George H. is online now
A new question is answered every 9 seconds

I have to manually activate the fuel shut off solenoid to

Customer Question

I have to manually activate the fuel shut off solenoid to start the truck . Replace the solenoid and still the same. Checked the fusable link its OK. trying to find a new relay, mine is a 5 pin and all the sites are listing a 4 pin. Where can i get the right relay?
JA: How many miles are on the car? How old is the battery?
Customer: new batteries, 90K miles
JA: What is the model/year of your Dodge?
Customer: 1997 dodge ram 3500 dually cummins turbo diesel
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Yes, replaced the solenoid and then checked that it works, Checked fusible link from battery and it is good, Hoping a new relay might work.
JA: Anything else you think the mechanic should know?
Customer: Not really, just not getting voltage required to kick the solenoid up.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and then connect you two.
Submitted: 3 months ago.
Category: Dodge
Expert:  George H. replied 3 months ago.

Hello I will help,

Both the 40 amp relays above the solenoid should be replaced. NAPA should have a relay that matches yours,if not I can get you an online link.

Let me know how I can help