How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1704
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

I have a 2004 dodge ram 5.7 hemi. It broke a valve spring

Customer Question

I have a 2004 dodge ram 5.7 hemi. It broke a valve spring last year. I replaced all the valve springs in both heads plus had the passanger head pulled! I had a bad lifter on cylinder 2 same as the spring that broke. Replaced all the lifters on that side plus new push rods. New plugs wires map sensor intake manifold and gaskets for head and intake and exuast. I still have a p300 and p302 and p304 codes plus a code for the evap system. I checked the purge selinoid it's good. tried a smoke test cant find the misfire help me
JA: Is this your first time dealing with this issue? What size is your engine?
Customer: yes 5.7 v8
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes and read the first paragraph
JA: Anything else you think the mechanic should know?
Customer: nope
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Dodge
Expert:  xsvector replied 4 months ago.

hows the cam shaft?

Related Dodge Questions