How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cwalkerjr21 Your Own Question
cwalkerjr21
cwalkerjr21, Auto Mechanic
Category: Dodge
Satisfied Customers: 710
Experience:  Shop training and experience.
73583367
Type Your Dodge Question Here...
cwalkerjr21 is online now
A new question is answered every 9 seconds

I used a hypertech programmer on my 2006 dodge magnum, now

Customer Question

I used a hypertech programmer on my 2006 dodge magnum, now it turns on but won't start. What do I do?! I tried unhooking the battery for a bit but nothing.
Submitted: 7 months ago.
Category: Dodge
Expert:  cwalkerjr21 replied 7 months ago.

Did the vehicle work with the programmer on it?

Expert:  cwalkerjr21 replied 7 months ago.

I need you to check the battery level. Make sure it reads above 12v. Than I need you to do a full reset. Disconnect both the negative an positive battery cables wait five minutes before reconnecting them rub them together. Reconnect them. If it will not start now we need to check the powers and grounds at the PCM and replace if they check out.