How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1704
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Caliber: I have a 2008 caliber , replaced the trans , codes

Customer Question

I have a 2008 caliber , replaced the trans , codes po700 po730 po777 p167a still remain and the car won't go more then 20mph . (not slipping ). Like it don't have power . not sure what to do
Submitted: 5 months ago.
Category: Dodge
Expert:  bill replied 5 months ago.
new or used transmission?did you run the trans iniliazion procedure with your scan tool to transfer the necessary info from the pcm to teh tcm?what tests did you do BEFORE you replaced the tranny, were these codes there BEFORE

Related Dodge Questions