How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, ASE Certified Technician
Category: Dodge
Satisfied Customers: 1525
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Dodge Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

The engine turns over but, no fire.New coil, new distibutor

Customer Question

The engine turns over but, no fire.New coil, new distibutor cap, new wires and new rotor button. Won't start. Help
Submitted: 1 year ago.
Category: Dodge
Expert:  Juan Crespo replied 1 year ago.
Hi there.In 99% of the cases, no-spark on this MY Durango usually means a bad distributor. The onboard computer uses the signal form the cam sensor/pick-up coil inside the distributor to fire the ignition coil. Are there any codes currently in the onboard computer's memory?
Customer: replied 1 year ago.
On board computer? Where is it?
Customer: replied 1 year ago.
Can we speak?(###) ###-####
Expert:  Juan Crespo replied 1 year ago.
All calls must be routed through the site and carry an additional $20 fee. Let me know if you'd like to do that and I'll send you the Offer.Your Durango has a computer-controlled power train called a PCM. This PCM is located on the right front inner fender, forward of washer fluid reservoir.
Customer: replied 1 year ago.
It didn't work
Expert:  Juan Crespo replied 1 year ago.
What did you do that didn't work?
Expert:  Juan Crespo replied 1 year ago.
What didn't work?