How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21440
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2000 Durango 4.7L hesitation onacceleration new head

Customer Question

2000 Durango 4.7L hesitation onacceleration new head passenger side ,cmp, ckp , TPS ,IAC map and ecm. TPS voltage KOEO 5v ref, .7v signal. What is the voltage reading at KOER. Can't get the signal voltage to go up. What's the supposed reading of map.
Any help!!!!
Submitted: 6 months ago.
Category: Dodge
Expert:  sprinkles08 replied 6 months ago.
Hello and welcome to JustAnswer!The TPS signal voltage would increase as the throttle opens. If you're seeing .7v on the signal wire with the throttle closed that's an expected reading. If it doesn't increase when opening the throttle then you have a bad sensor.The first step in diagnosing the problem is to see if any fault codes are setting. Have you checked for codes?

Related Dodge Questions