How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6964
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

Have a 300 chrysler 2.7l show misfire on cylinder 4 replaced

Customer Question

Have a 300 chrysler 2.7l show misfire on cylinder 4 replaced plug ignition coil and even injector shows same code I am assuming that #4 is located on driver side in the middle what else could it be
Submitted: 8 months ago.
Category: Dodge
Expert:  -Brad- replied 8 months ago.

Good evening and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 18 years and I will do my best to help.

If you have a P0304 then you will need to check compression to make sure the base engine is fine, if the compression shows around 150 then you will need to check for spark and if the coil and injector is getting 12v constant and a ground pulse..

Let me know what you find,

Brad

Customer: replied 8 months ago.
All appear in order to be clear #4 is located on driver side in the middle correct
Customer: replied 8 months ago.
Strange sometime it idles perfectly even driving sometime misfires very noticeable
Expert:  -Brad- replied 8 months ago.

What is your VIN number?