How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1751
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

04 Dodge Durango fried my pcm, replaced with new pcm with

Customer Question

04 Dodge Durango fried my pcm, replaced with new pcm with matching key and immobilizer but the security system is enabled ( little red light in dash flashing) and is not allowing truck to start. How do I get around that or turn it off?
Submitted: 10 months ago.
Category: Dodge
Expert:  -Brad- replied 10 months ago.

You will need a new PCM not a used one, after you replace it you will need to run the PCM replaced function with a WiTech scantool to program the PCM to the vehicle.

Related Dodge Questions