How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka-Moose) Your Own Question
Chris (aka-Moose)
Chris (aka-Moose), Technician
Category: Dodge
Satisfied Customers: 46488
Experience:  16 years of experience
2499435
Type Your Dodge Question Here...
Chris (aka-Moose) is online now
A new question is answered every 9 seconds

2000 DODGE DAKOTA NEW PICK UP NEW DISTRIBUTOR NEW FUEL PUMP

Customer Question

2000 DODGE DAKOTA NEW PICK UP NEW DISTRIBUTOR NEW FUEL PUMP NEW FUEL NEW INJECTORS
NEW COIL
NEW CRANK SENSOR
Submitted: 1 year ago.
Category: Dodge
Expert:  K. Wiggins replied 1 year ago.

Hello, I'm assuming it will not start? Does the check engine light come on when the key is first turned on? Which engine does it have?

Customer: replied 1 year ago.
light comes on it will not start
Customer: replied 1 year ago.
3.7
Customer: replied 1 year ago.
new emc also
Customer: replied 1 year ago.
hello
Customer: replied 1 year ago.
if u dont know ill get a mechanic
Customer: replied 1 year ago.
do u plan on answering in days or hours or is this just some open forum where people openly trade useless info
Customer: replied 1 year ago.
because i need a car repaired
Expert:  K. Wiggins replied 1 year ago.

I apologize for the delay. Just Answer is made up of experts who have verified experience/certification in the automotive field. We often deal with several people at a time so there may be some delay.

Have you checked for voltage at the Dark green and orange wire at the coil with the key on? IF the auto shut down relay is not allowing voltage to the coil it will result in a no start condition.

Customer: replied 1 year ago.
all wiring is correct 5volts and ground
Customer: replied 1 year ago.
the power comes and goes to the coil but i replaced the relay
Customer: replied 1 year ago.
i feed power to the coil and it doesn't do anything where does the other wire come from i replaced the ecm also
Customer: replied 1 year ago.
all wires to cam and crank have correct voltage
Expert:  K. Wiggins replied 1 year ago.

I'll post the wiring diagram to the coil below. There's a fuse, joint connector then coil. I've highlightedsome things to check.

Customer: replied 1 year ago.
ok i did that put 12 to coil power wire does nothing
Customer: replied 1 year ago.
i jumper auto shut down relay
Customer: replied 1 year ago.
r u joking
Customer: replied 1 year ago.
u suck
Expert:  Chris (aka-Moose) replied 1 year ago.

Welcome, I'm Chris (aka Moose). Experts aren't employees / agents of Just Answer. We are independent service providers using the Site to sell their Expert knowledge to Customers. I strive to provide EXCELLENT 5 STAR service, let me know what's needed from me so your pleased.

The previous tech has opted out. Would you like me to try and help?