How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Dodge
Satisfied Customers: 13031
Experience:  Dodge/Cummins and Chrysler Certified Master Tech
12365498
Type Your Dodge Question Here...
Chris is online now
A new question is answered every 9 seconds

COde p1765 on a 1999 dodge ram 2500 with 5.9 litre gas

Customer Question

COde p1765 on a 1999 dodge ram 2500 with 5.9 litre gas engine
Submitted: 1 year ago.
Category: Dodge
Expert:  Chris replied 1 year ago.

Hello and welcome to just answer. This code will set when the PCM detects a problem in the transmission relay circuit. Is the transmission shifting or does it stay in second gear?

Chris

Customer: replied 1 year ago.
Stays in second gear
Customer: replied 1 year ago.
U still there
Expert:  Chris replied 1 year ago.

Ok, I will send you a procedure for diagnosing this code. Do you have a ohm/volt meter?

Chris

Customer: replied 1 year ago.
Expert:  Chris replied 1 year ago.

Ok, give me a few minutes to get this all together and send it to you.

Chris

Expert:  Chris replied 1 year ago.

Ok, below are 2 DroBox links. The first is the diagnostic procedure and the second is the PCM connector pinout information.

Copy and paste them into your browser's address bar and hit enter to see the information. Copy and paste them separately.

I hope this helps you diagnose this and if so please take a minute to rate my service today. That is how I get credit for my services. Thank you!

Here is the diagnostic link:

https://www.dropbox.com/s/8vol4yqyzzb1pic/P1765%20test.doc?dl=0

.

And here is the PCM connector link:

https://www.dropbox.com/s/m14t4t7tm4umbkp/POWERTRAIN%20CONTROL%20MODULE%20C2.doc?dl=0

Expert:  Chris replied 1 year ago.

Hello, just checking back to see if you received the information I sent.

Chris

Expert:  Chris replied 1 year ago.

Hello, just checking back to see if you received my last reply?

Chris