How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask bill Your Own Question
bill
bill, dodge master tech
Category: Dodge
Satisfied Customers: 1617
Experience:  25 years with dodge drivability and electrical expert
5203640
Type Your Dodge Question Here...
bill is online now
A new question is answered every 9 seconds

How do I get the engine computer out of my 2002 dodge 3500

Customer Question

how do I get the engine computer out of my 2002 dodge 3500 truck
Submitted: 1 year ago.
Category: Dodge
Expert:  bill replied 1 year ago.

remove the left (drivers side) inner plastic fenderwell and there will be plenty of access to get the ecm out, I have also gotten them out from under the truck BUT pulling the fenderliner is far easier.

this is assuming a STOCK engine bay and no messy plow wiring or modifications to the intake system, there are some cases where I have had to remove the intercooler pipe to get enough room but NOT in every case