How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6964
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

Replacing the ignition tumbler on a 2007 dodge nitro.

Customer Question

Replacing the ignition tumbler on a 2007 dodge nitro.
Submitted: 11 months ago.
Category: Dodge
Expert:  -Brad- replied 11 months ago.

Good evening and welcome to JustAnswer!!!

In order to replace the tumblers you will first need to insert a valid key and turn it to run and press the in to pull the lock cylinder out.. (I attached the directions)

Once you have it out you can pull them out and replace the tumbler and springs..

I hope this helps,

Brad

Expert:  -Brad- replied 10 months ago.

Do you still need help with this?

If not I would appreciate a positive rating so I'm compensated for my time..

Have a good evening,

Brad