How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21570
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
9825021
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Swapped an allison 1000 6 speed into a dodge ram 3500 2004.5

Customer Question

swapped an allison 1000 6 speed into a dodge ram 3500 2004.5 now have a 2127 code how i do get rid of it?
Submitted: 11 months ago.
Category: Dodge
Expert:  sprinkles08 replied 11 months ago.
Hello and welcome to JustAnswer!P2127 has to do with the accelerator pedal position sensor. The APPS contains a sensor as well as an idle switch and off idle switch. This code sets when the idle switch and not idle switch are in the same state, which obviously can't happen physically. This will be a sensor or wiring issue.This wouldn't be related to swapping the trans itself. Was something done to the APPS?

Related Dodge Questions