How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1751
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

99 durango 4x4. V8. 5.2 Ran fine went out to start it would

Customer Question

99 durango 4x4. V8. 5.2
Ran fine went out to start it would no start .i let it sit for a few days and it started up.i replaced the position sensor..ut would not start i let it sit overnigt and started right up ..as soon as it goes in reverse it shuts off and wont start up until next day.what could this be .thanks jv
Submitted: 1 year ago.
Category: Dodge
Expert:  Joe Barfield replied 1 year ago.

Hi , So you just Replaced the.... Cam Sensor Correct ?

Related Dodge Questions