How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6964
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I have a 2003 intrepid and i need the pin code so i can

Customer Question

Hi i have a 2003 intrepid and i need the pin code so i can program a new key.
Submitted: 11 months ago.
Category: Dodge
Expert:  -Brad- replied 11 months ago.

Good evening and welcome to JustAnswer!!!

Do you still need help with this? Can I get the last 8 digits of your VIN?

Talk soon,

Brad

Customer: replied 11 months ago.
3h551494
Expert:  -Brad- replied 11 months ago.

Thanks for the reply!!!

The pin is 8139.

I hope this helps and thank you for the positive rating,

Brad

Customer: replied 11 months ago.
Says pin entered is not valid
Expert:  -Brad- replied 11 months ago.

Is 2B3HD46R13H551494 your VIN? If yes then PIN is correct and I would check the VIN that is written in the PCM.. If it's not correct please reply with the correct VIN..

Thanks,

Brad

Customer: replied 11 months ago.
Yup check the van in the PCM and in the security module and the van is the same exact as you typed out where do I go from here
Customer: replied 11 months ago.
Check engine light flashes 10 times when key is in on position
Expert:  -Brad- replied 11 months ago.

Are you using a DRBIII to program the key? What codes are in the SKIM module? Is it a OEM gray headed SKIM key?

Customer: replied 11 months ago.
One code is invalid oey other code is transponder mismatch... also car is a no crank
Expert:  -Brad- replied 11 months ago.

So your other key doesn't work either? If no and it will not start then you need a new SKIM module. But if you have tried more then 3 codes and all have failed then it's in lock-out mode and you will need to leave the key on for 90 min and retry again...

I hope this helps and thank you for the positive rating,

Brad

Customer: replied 11 months ago.
Does key need to be left in on position for 90 mins? Then i enter the pin u gave me bc i did try more than 3 codes before we talked
Customer: replied 11 months ago.
Lost keys got a new one so there is no 2nd key only un programmed one
Expert:  -Brad- replied 11 months ago.

Yes try the lockout removal and see what happens, if not then you will need to replace the SKIM module..

Glad I could help,

Brad

Expert:  -Brad- replied 11 months ago.

Since I haven't got a reply I'm guessing you have it fixed....

Glad I could help and thank you for the positive rating,

Brad