How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1751
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

I have tested all wires and connection to ignition. I get 12

Customer Question

I have tested all wires and connection for starter to ignition. I get 12 volts. I took the starter off the engine and the main cables as well. Hooked them on and the starter it started. Then put it all back together and back to the same problem of not
starting. Any ideas for solution
Submitted: 1 year ago.
Category: Dodge
Expert:  Mike S. replied 1 year ago.

So you are saying you do have 12 volts to the starter solenoid at the light green wire when the key is on start but the starter will not crank and also you do have 12 volts to the big red cable. Is this correct?

Expert:  Mike S. replied 1 year ago.

Incase here is the wiring diagram,

Expert:  Mike S. replied 1 year ago.

Do you still want help?