Dodge Repair Questions? Ask a Mechanic for Answers ASAP
Do they light up when you put the signal on?Are all out or just front or rear?
Do your hazards work?
What series is the truck? 4x4 or 2wd?
Need to make sure I am looking at the right wiring diagram
Do you have a test light or volt meter so we can test or would you rather I suggest what part is the likely culprit here?It uses the same flasher for the signals as it does the hazards, so that basically tells us the fuses and the flasher are fine.
To me this leaves the multi function switch. It has the hazard switch, turn signal switch all together. The turn signal section seems to be bad on it.
yes i have a test light.
You need to pull the cover off the steering column and check for power on the following wires.
Pink and red/gray stripe. Please check them and let me know.