How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6974
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I need the wiring diagrams rear tail/brake/turn signals 2007

Customer Question

I need the wiring diagrams for the rear tail/brake/turn signals for a 2007 dodge diesel and a 2003 dodge diesel both 3500 rams.
Submitted: 1 year ago.
Category: Dodge
Expert:  -Brad- replied 1 year ago.

Good afternoon and welcome to JustAnswer!

Can I get the last 8 digits of your VIN so I can get the wiring diagram for you?

Customer: replied 1 year ago.
I don't have them actually. I am doing the research for a friend who is having a utility bed swapped from his 2003 ram 3500 to a 2007 ram 3500. He hooked up his lights and when he turns on the left turn signal, it works, but his right signal light blinks alternately and very dimly. The same thing happens in reverse when he turns his right turn signal on, it works but his left blinks alternately and very dimly.
Expert:  -Brad- replied 1 year ago.

I looked up a 2007 Ram 3500 and gave you all the rear lighting wiring diagrams.. I will also add that if he is using LED lights that you will need to add a resistor to add load to the circuit to eliminate the fast blinking...

I hope this helps and thank you for the positive rating,

Brad

Expert:  -Brad- replied 1 year ago.

.

Expert:  -Brad- replied 1 year ago.

Don't forget to rate me so I'm credited for my time..

Thank you,

Brad