How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1754
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

I have a 2001 Dodge Ram 1500 5.2 that I was working on

Customer Question

I have a 2001 Dodge Ram 1500 5.2 that I was working on installing a light bar. I hadn't run any power yet and I went to get go a part and it won't start. No power at all to the instrument panel or the OBDII port. I've checked every fuse and relay.
Submitted: 1 year ago.
Category: Dodge
Expert:  Dodgerench replied 1 year ago.

Hi, welcome to JustAnswer!. This is Ed.

Help me understand your situation a bit more...

Do you have electrical power or function any place at all? Or is it just the cluster and OBD port that's affected?

Does the engine crank?

Have you checked battery voltage right at the posts or tried a jump start/ jumper box?

Talk shortly,

Ed