How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1753
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

I replace the Electronic throttle control to my 2003 Dodge

Customer Question

i replace the Electronic throttle control to my 2003 Dodge 1500 Ram and the problem is still there, is there something that has to be reset?
Submitted: 1 year ago.
Category: Dodge
Expert:  Tim Mohr replied 1 year ago.

hi, my name is ***** ***** kind of problems are you having?

Customer: replied 1 year ago.
i replaced the Electronic throttle control to my 2003 dodge 1500 ram and il still having the same problem is there something that need to be reset?
Expert:  Tim Mohr replied 1 year ago.

what was the original problem you had?

Customer: replied 1 year ago.
not really
Customer: replied 1 year ago.
truck was stalling and the lighting blot light came on
Expert:  Tim Mohr replied 1 year ago.

what codes did you get from the computer?

Customer: replied 1 year ago.
didnt
Expert:  Tim Mohr replied 1 year ago.

can you check the codes in the computer?

Customer: replied 1 year ago.
should it be just replacing the ETC that simple
Customer: replied 1 year ago.
I would have to get back to you later I'm not with the truck
Expert:  Tim Mohr replied 1 year ago.

NO, it might not have even been bad? but it does have to be relearned into the computer once its installed, but first can you check for codes?

Customer: replied 1 year ago.
Can I get back to you later today?
Expert:  Tim Mohr replied 1 year ago.

Yes, just reply back to this question,Tim

Customer: replied 1 year ago.
Hi Tim on back I installed the old ETC I'm not getting any code I must have eraced them yesterday
Customer: replied 1 year ago.
Are you there
Customer: replied 1 year ago.
JustAnswerAsk a question
Remember to rate your expert here after you get an answer and finish talking.
Tim Mohr
i replace the Electronic throttle control...
i replace the Electronic throttle control to my 2003 Dodge 1500 Ram and the problem is still there, is there something that has to be reset?
04 November 2015 03:00Tim Mohr Tim Mohr
Dodge Mechanic
hi, my name is ***** ***** kind of problems are you having?04 November 2015 03:04 i replaced the Electronic throttle control to my 2003 dodge 1500 ram and il still having the same problem is there
Customer: replied 1 year ago.
Holle
Customer: replied 1 year ago.
Still having the same problem
Expert:  Tim Mohr replied 1 year ago.

so have you relearned the throttle body with a scanner?