How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jared D Your Own Question
Jared D
Jared D, ASE Certified Technician
Category: Dodge
Satisfied Customers: 1448
Experience:  Shop Supervisor at County Fleet
62275574
Type Your Dodge Question Here...
Jared D is online now
A new question is answered every 9 seconds

I have a 2006 Dodge Dakota with auto trans. I have a check

Customer Question

I have a 2006 Dodge Dakota with auto trans. I have a check engine light P0882 and the #15 is blown. how do i fix this?
Submitted: 1 year ago.
Category: Dodge
Expert:  Jared D replied 1 year ago.

First thing to do is replace the fuse and the bad relay. Then follow this fault tree from dodge to see where there is a possible short. The only thing that causes fuses to blow is a short somewhere.

Customer: replied 1 year ago.
i am on step 5 of the of the fault tree. i am unsure of the location of the transmission solenoid/trs assembly harness connector. i am also not sure which one is the C4 connector on the PCM. can you help with this?
Expert:  Jared D replied 1 year ago.

Here is the diagram that dodge publishes on it.

Expert:  Jared D replied 1 year ago.

The connectors number from the top down. So C4 would be the connector on the bottom.

Expert:  Jared D replied 1 year ago.

Here is a diagram of all the connector pins.

Expert:  Jared D replied 1 year ago.

Please let me know if you need any additional information.

Customer: replied 1 year ago.
Where is the location of the transmission solenoid/trs assembly harness connector? I have the 42RLE transmission.
Expert:  Jared D replied 1 year ago.

The solenoid connector is on the side of the transmission. I can't find a location diagram showing exactly where in any of the repair manuals. Here is the pin-out view of the connector. It should be easy to see if you look on the side of the transmission housing.

Expert:  Jared D replied 1 year ago.

I just wanted to see if you need more help. Please don't forget to rate.