Dodge Repair Questions? Ask a Mechanic for Answers ASAP
these are a very tight squeeze. you will have to remove the o2 sensor.
i will send a few diagams to help you. give me a few minutes
patience will be needed for this one.
here are the diagrams.
i am checking ontime
i have 1.4 hours listed.
thank you for letting me help you and i apprieciate positive ratings.
thanks and if you a=have any more problems give me a message.
no, i have no listing on removing the cat.
2.Disconnect the negative battery cable.
3.Raise vehicle and support.
4.Disconnect the electrical connector from the O2 sensor.
5.Remove the O2 sensor from the exhaust manifold Fig. 1.
Fig. 1 - O2 SENSOR
6.Remove the front mount through bolt.
7.Remove the front mount bracket from engine block.
8.Remove the battery cable from starter Fig. 2.
Fig. 2 - STARTER MOTOR
9.Remove the lower starter bolt and remove starter Fig. 3.