How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6970
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I trip my security by unhooking my Bartley now I have a red

Customer Question

I trip my security by unhooking my Bartley now I have a red dot. How do I use my fob key to unlock
Submitted: 1 year ago.
Category: Dodge
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  -Brad- replied 1 year ago.

Good afternoon and welcome to JustAnswer!!

What kind of vehicle do you have? Do you have another key to try?

Customer: replied 1 year ago.
Dodge charger 2009
Expert:  -Brad- replied 1 year ago.

Will the key lock and unlock the doors? Do you have another key to try?

Customer: replied 1 year ago.
it unlocks and locks . Yes i have another key but only one battery, but both fob do work
Expert:  -Brad- replied 1 year ago.

The red light is your security light which means your keys or WIN module is bad.. Now what is the Bartley you disconnected?

Customer: replied 1 year ago.
Sorry meant battery.
Expert:  -Brad- replied 1 year ago.

If both keys will not work and you have the red light then it's likely the WIN module is bad and it willneed to be replaced, but to verify this you will need to read the codes in the WIN module...

Customer: replied 1 year ago.
I was told by the dealer i need to reprogram my keys WIN is fine
Expert:  -Brad- replied 1 year ago.

I didn't read where you said it's been to a dealership. Do you have a scantool to program the keys?

Customer: replied 1 year ago.
I just call them I'm about 5 mile from a dealer. Was told it's a $135 to program. This happen a year ago when i by mistake put my 2008 charger key in the 2009 that I'm have problems with
Customer: replied 1 year ago.
I don't have a scan tool.
Expert:  -Brad- replied 1 year ago.

So it hasn't been to a dealership and they are guessing over the phone...... Well the correct way to repair this is to retrieve the codes from the WIN module and run the test for each code... Either way you will need a scantool and since you don't have one it's time for a trip to the dealership..

Glad I could help and thank you for the positive rating,

Brad

Customer: replied 1 year ago.
What type if scan tool do I need?
Customer: replied 1 year ago.
Will a scan tool OBD2 code reader work?
Expert:  -Brad- replied 1 year ago.

You will need a WITech scantool that I use here at the dealership,. A code reader is not the same thing

Customer: replied 1 year ago.
Okay Thank You for ur time.
Expert:  -Brad- replied 1 year ago.

You are very welcome

Thank you for the positive rating,

Brad