How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony
Anthony, ASE Certified Technician
Category: Dodge
Satisfied Customers: 11750
Experience:  ASE Master Automobile Technician with over 20 years exp. in this field.
15218643
Type Your Dodge Question Here...
Anthony is online now
A new question is answered every 9 seconds

2007 Dodge Ram 1500 5.7L - In limp mode - Codes: P2123,

Customer Question

2007 Dodge Ram 1500 5.7L - In limp mode - Codes: P2123, P0222, P0122 - APPS1 has NO VOLTAGE even when the pedal is to the floor - APPS2 has voltage and changes as pedal is pressed - Thinking pedal sensor assembly is bad but wanted a second opinion - Thx
Submitted: 1 year ago.
Category: Dodge
Expert:  Anthony replied 1 year ago.

Hello!

Sorry for the delay...

The 122 and 222 codes are for the electronic throttle body. So I would change that first then see how it does. The 2123 is for the pedal assembly but may be false. However You may have to replace both the pedal and the throttle to get it right.

Customer: replied 1 year ago.

Can you explain why there is no reading from the accelerator pedal position sensor 1? It is showing no voltage at all on the data stream, even when the pedal is pressed to the floor. APPS2 is working.

Expert:  Anthony replied 1 year ago.

Sorry for the delay...

If you have no reading from APPS1 then the pedal sensor has failed also.