How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 6965
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

I have the same issue. I have a Chrysler Radio that I need

Customer Question

Hello. I have the same issue. I have a Chrysler Radio that I need an anti theft code for.
Submitted: 1 year ago.
Category: Dodge
Expert:  -Brad- replied 1 year ago.

If you could reply back with the VIN and serial number I will be glad to get that for you..

Customer: replied 1 year ago.
The model number of the radio is P05091336AF The Serial Number is ***** 00 AM 095 4 T0646 VIN Number of vehicle the radio came out of is 2C3CDYAG8EH293830
Expert:  -Brad- replied 1 year ago.

I will need the VIN number of the vehicle it's being installed in to get the code.

Customer: replied 1 year ago.
Ahhh... Should I contact when I have that information? The radio is sold on Ebay. I'm trying to get the code for the buyer.
Customer: replied 1 year ago.
Hello?
Expert:  -Brad- replied 1 year ago.

You don't have your VIN number?

Expert:  -Brad- replied 1 year ago.

In order to get you the security code I need the VIN of the vehicle it's being install into, and the radios serial number..

Expert:  -Brad- replied 1 year ago.

I have the serial as being T00AM0954T0646 I just need the VIN and we will be all set.

Customer: replied 1 year ago.
I do not have the VIN number of the vehicle to be installed in. I have the VIN of the vehicle it came out of.
Customer: replied 1 year ago.
Plus serial and model numbers. Did you get those?
Expert:  -Brad- replied 1 year ago.

Ok when you get the VIN of what it's being installed into then I can get you the PIN..

Customer: replied 1 year ago.
OK. Come back here and ask for Brad?
Expert:  -Brad- replied 1 year ago.

Just reply to this question and I will reply...

Customer: replied 1 year ago.
I don't want a phone call.
Expert:  -Brad- replied 1 year ago.

Will you have that info today or tommorrow?

Customer: replied 1 year ago.
Probably tomorrow
Expert:  -Brad- replied 1 year ago.

OK I look forward to your reply..

Customer: replied 1 year ago.
Is it easy to get back in touch?
Expert:  -Brad- replied 1 year ago.

Yes just reply to this question and I will reply...

Customer: replied 1 year ago.
OK... Thanks
Expert:  -Brad- replied 1 year ago.

You are very welcome!!!

Customer: replied 1 year ago.
Brad... Are you there?
Customer: replied 1 year ago.
Please see the response from the buyer... Can we do this without his VIN Number?You don't need my VIN. According to Service Bulletin 08-011-12 the procedure is:HOW TO REQUEST RADIO THEFT CODES IN DEALERCONNECT.DISCUSSION:
Starting in model year 2012 radios will come equipped with an anti-theft feature. Once a
radio is installed in a vehicle, it learns the vehicle’s VIN and cannot be used in another
vehicle unless an anti-theft code is applied.PROCEDURE TO OBTAIN ANTI-THEFT CODE:
1. **Refer to DealerCONNECT> Service> Repair Box> Radio Anti Theft Code.**
2. **On the Anti-Theft/Radio Code Search screen.**
3. **Insert radio serial number.**
4. **Insert 17 digit VIN.**
5. **Insert part number.**
6. **Select reason.**
7. **Click on Submit.**
8. The 4-digit anti-theft code will be provided.RADIO ANTI-THEFT CODE PROCEDURE
1. Ignition in the run position.
2. Press the ON/VOL control.
3. The word CODE or Please enter Anti-Theft Code will appear on the display.
4. Enter the 4-digit code by pressing the corresponding preset buttons in sequence.NOTE: If three successive attempts are made to enter an invalid anti-theft code the
radio will enter a ‘WAIT’ state. While in this state the radio display will read
‘WAIT’. To exit the ‘WAIT’ state the radio must remain powered with the
ignition in the run position for a continuous 30 minutes (the vehicle may be
driven during this time). After exiting the ‘WAIT’ state the radio will again
display ‘CODE’ and a valid anti-theft code may be entered.Policy:
Information only.
Expert:  -Brad- replied 1 year ago.

Good Evening..

Yes I know all of that, and yes I will need the VIN to get you the code.. No way around it.

Customer: replied 1 year ago.
Let me contact the buyer again.
Expert:  -Brad- replied 1 year ago.

If he's worried about security I just need the last 8 digits of the VIN..

Expert:  -Brad- replied 1 year ago.

Do you still need help with this?