How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask -Brad- Your Own Question
-Brad-
-Brad-, Dodge Dealership Tech
Category: Dodge
Satisfied Customers: 7239
Experience:  16 Yrs Chrysler/Dodge Technician. ASE Master Certified(L-1)
10114124
Type Your Dodge Question Here...
-Brad- is online now
A new question is answered every 9 seconds

My dodge 03 4.7 keeps showing P0344 can sensor and I

Customer Question

My dodge 03 4.7 keeps showing P0344 can sensor and I replaced it but the code is still there. What can it be?
Submitted: 1 year ago.
Category: Dodge
Expert:  -Brad- replied 1 year ago.

Good morning and welcome to JustAnswer!!!

The code you have is Intermittent camshaft sensor signal, now did you replace it with a OEM sensor? Will it start and run or not and when did this issue start?

Customer: replied 1 year ago.
It does start and drive but if I step on it, it skips
Customer: replied 1 year ago.
What's the OEM sensor? The crank sensor?
Expert:  -Brad- replied 1 year ago.

I have attached the diagnostic steps for P0344..

OEM means Original Equipment which means a camshaft sensor from the Dodge dealership..

Expert:  -Brad- replied 1 year ago.

If it will start then try moving the wiring harness and see if you can duplicate the issue, it could be a wiring issue.. If not your going to need a scantool to monitor the sensor.

Customer: replied 1 year ago.
It started last night on an hour drive home and trying to fix it this morning so I went to the auto parts store and replaced the EMO sensor and didn't fix the problem?
Expert:  -Brad- replied 1 year ago.

Did you replace the camshaft sensor which is under the passenger side head?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
Still didn't fix the problem
Customer: replied 1 year ago.
Hello Brad u still there what do I do now
Expert:  -Brad- replied 1 year ago.

What did you find when you run the test I provided?

Customer: replied 1 year ago.
Everything checks out right!
Expert:  -Brad- replied 1 year ago.

What type of scantool are you using?

Expert:  -Brad- replied 1 year ago.

I'm guessing you didn't run the diagnostic steps I provided...

Customer: replied 1 year ago.
I'm still running diagnostic check on my truck
Expert:  -Brad- replied 1 year ago.

Thanks for the reply!!

If you will run it step for step I guarantee you will find your issue..

Brad

Customer: replied 1 year ago.
Ok thanks
Expert:  -Brad- replied 1 year ago.

You are very welcome..

Glad I could help and thank you for the positive rating,

Brad

Expert:  -Brad- replied 1 year ago.

I see this question is still open.. Do you need more assistance?

Related Dodge Questions