How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Virtual Wrench Your Own Question
Virtual Wrench
Virtual Wrench, Dodge Mechanic
Category: Dodge
Satisfied Customers: 14618
Experience:  35 years Master Mechanic
2617050
Type Your Dodge Question Here...
Virtual Wrench is online now
A new question is answered every 9 seconds

I have been having a problem with the ashboard circuit board

Customer Question

I have been having a problem with the ashboard circuit board for some time now. Shows no gas when I have gas and engine does not start. Thumping dash does not bring it back. At one point I tried cleaning the contacts, but did not help. Do I need to swap out board now?
Submitted: 1 year ago.
Category: Dodge
Customer: replied 1 year ago.
I have been having a problem with the dashboard circuit board for some time now. Shows no gas when I have gas and engine does not start. Thumping dash does not bring it back. At one point I tried cleaning the contacts, but did not help. Do I need to swap out board now?
Customer: replied 1 year ago.
Sometimes after I have the battery disconnected it seems to start for awhile, then if I hit a bump in the road the I get extra lights flashing on dah
Customer: replied 1 year ago.
flashing on dash board
Expert:  Virtual Wrench replied 1 year ago.

Remove the instrument cluster and reinstall it. This will make the mulit connector contacts get better connection. They are very small pins and the connection loosens overtime.

99% of the time it fixes it, if not the cluster will need replaced.

Expert:  Virtual Wrench replied 1 year ago.

ANy further questions?

Related Dodge Questions