How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Lou P. Your Own Question
Lou P.
Lou P., ASE Certified Technician
Category: Dodge
Satisfied Customers: 3719
Experience:  I Have knowledge in almost all car lines and can help with general questions and more!!!!!
27644750
Type Your Dodge Question Here...
Lou P. is online now
A new question is answered every 9 seconds

I just bought a 2008 sprinter and it is reading codes 2510

Customer Question

hey Robert I just bought a 2008 sprinter and it is reading codes
2510
2641
2853
3119
2953
could you tell me what i should do
Submitted: 1 year ago.
Category: Dodge
Expert:  Lou P. replied 1 year ago.

Hello, I am researching the codes now , is there any vehicle symptoms as well? Like drive ability or runability?

Expert:  Lou P. replied 1 year ago.

2510 is for the boost pressure regulator on the side of the turbo. These are very prone to failure and are only available with the turbo. HOWEVER you can find replacement units online and they are very easy to change. Just search for the part number that is on the black cover of the electronics of the unit.

Expert:  Lou P. replied 1 year ago.

2641 is for the egr valve. It may be faulty or sticking

Expert:  Lou P. replied 1 year ago.

2853 no info yet

Expert:  Lou P. replied 1 year ago.

3119 is exhaust gas temperature sensor upstream

Expert:  Lou P. replied 1 year ago.

Upstream of catalytic converter sorry

Customer: replied 1 year ago.
No symptoms it runs great
Expert:  Lou P. replied 1 year ago.

2953 is for inlet port shutoff motor.

Expert:  Lou P. replied 1 year ago.

And to have the codes for the turbo actuator and the port shutoff motor AND no symptoms are unheard of and unique for sure !

Expert:  Lou P. replied 1 year ago.

2853

Expert:  Lou P. replied 1 year ago.

That is for the CAN data bus for the engine and there is no test available.

Expert:  Lou P. replied 1 year ago.

So now that all the codes are established pretty much you have all the common issues at once , I would erase codes and drive and fix them as they return. I'm not sure how you want to proceed so you let me know and I'll do my best to assist !! Lou

Related Dodge Questions