How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Crawford Your Own Question
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Dodge
Satisfied Customers: 4017
Experience:  MO Safety/Emissions Certified on all makes and models with a strong electronics background aiding in electrical troubleshooting.
66997337
Type Your Dodge Question Here...
Wayne Crawford is online now
A new question is answered every 9 seconds

I have put a 2001 body with a v10 on a 97 cummins chassis

Customer Question

I have put a 2001 body with a v10 on a 97 cummins chassis and i'm trying to get bulkhead diagrams, after no luck with that i am now doing individual gauges right now working on fuel sender diagram for cluster
Submitted: 1 year ago.
Category: Dodge
Expert:  Wayne Crawford replied 1 year ago.

Hello. My name is ***** ***** I will be helping you today.

You need to know wire colors for the 01, correct?

Customer: replied 1 year ago.
I would like bulkhead diagrams for 01 and 97 if possible to match wires from 97 pcm harness transferred to 01 under hood fuse block there are wires left over apparently for sensors. engine starts and runs normal but no gauges. so next I was trying to do individual gauge traces from sensors and I started with fuel sender when connected to fuel sender for 97 harness engine started with on own with key not in ignition. For clarification I have the 01 harness in truck except for engine & pcm harnesses. So I was hoping for bulkhead diagrams at firewall and cluster. thanks
Expert:  Wayne Crawford replied 1 year ago.

That shouldnt be a problem. One moment while I check and make sure I got them.

Expert:  Wayne Crawford replied 1 year ago.

Is the 01 a quad cab?

Customer: replied 1 year ago.
it is, sorry for delay message on phone delayed
Customer: replied 1 year ago.
I haven't got an answer yet, reminder to rate service every day but I will give time to respond.
Expert:  Wayne Crawford replied 1 year ago.

Sorry about that. The system automatically sends those. I have been out. I got hurt and have been on pain killers mostly sleeping. Just a moment while I get those.

Expert:  Wayne Crawford replied 1 year ago.

How many pins is your bulkhead on the 97? Im having an issue locating that one again.

Customer: replied 1 year ago.
Hope you're feeling better. 72 small and 12 large terminals not all are used. thanks
Expert:  Wayne Crawford replied 1 year ago.

For some reason I dont have a listing on it. Im gonna opt out.. hopefully someone else will have it.