How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21585
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
9825021
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Dodge Ram 3500: 1998 Dodge Ram 5.9 24 valve starts fine first

Customer Question

1998 Dodge Ram 5.9 24 valve starts fine first time after s couple of hours cranks but does not start has new lift pump 2year old injection pump.
Submitted: 1 year ago.
Category: Dodge
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer! There are quite a few things that will cause a hard start or no start condition. I'm assuming that the transfer pump was replaced in an attempt to repair this issue, rather than the rpoblem starting after the pump was replaced. The most common cause of a no start with a functional transfer pump would be a failed injector pump, but it could also be a cam or crank sensor issue, wiring, the fuel system relay, the ECM itself or a loss of power or ground to it, or possibly fuel drainback. The first step in diagnosing the problem is checking for fault codes in the ECM. Has this been one?