How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Dodge Tech -
Category: Dodge
Satisfied Customers: 17942
Experience:  18+yrs experience. State Inspector and Dodge Diagnostics
18617752
Type Your Dodge Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

Ram 1500 4.7: I'm installing a g-force chip on my 4.7 ram at

Customer Question

I'm installing a g-force chip on my 4.7 ram at the MAF/IAT sensor. The wiring to the sensor has 6 wires. I need to know which two I need to hook on.
Submitted: 1 year ago.
Category: Dodge
Expert:  Ron Z. replied 1 year ago.
On this vehicle, the IAT Sensor is a 2-wire, stand alone sensor located near the throttle body (#1 in THIS IMAGE). At the IAT Sensor, the wire colors are:Dark Blue/Light Green = IAT Signal ( + )Dark Blue/Dark Green = Sensor Ground ( - ) Please remember, your rating is required. Leave a rating using the rating system at the top of this page or accept the answer and let me know how my service was today! You can ask follow-up questions any time, even after you rate or accept.