How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 21594
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
9825021
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Caliber: the rear latch to my 2008 caliber stopped working.

Customer Question

the rear latch to my 2008 caliber stopped working. It is manuel
Submitted: 1 year ago.
Category: Dodge
Expert:  sprinkles08 replied 1 year ago.
Hello and welcome to JustAnswer!
I'm assuming it's the liftgate you're having trouble with.
It's possible that the latch itself may have mechanically found but it appears there was physical damage to the liftgate and possible the cable and handle. If it was opening up until that point and you're unsure if the cable is installed correctly then that may be the only issue.
Are you able to upload a picture of where you reinstalled the cable?