How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mrchippeway Your Own Question
Mrchippeway
Mrchippeway, ASE Certified Technician
Category: Dodge
Satisfied Customers: 110
Experience:  Dodge tech
66273772
Type Your Dodge Question Here...
Mrchippeway is online now
A new question is answered every 9 seconds

Intrepid es: ! I am attempting to change input and output

Customer Question

Hello! I am attempting to change input and output sensors. The harness and connector are giving me grief. Do I just pull to disconnect from the sensor?
Submitted: 1 year ago.
Category: Dodge
Expert:  Mrchippeway replied 1 year ago.
You have to press the button in on the one side, but this usually doesn't help if it is full of sand/dirt!! I tap the connector with the end of a screw driver to loosen up the dirt! The. Blow it out with air, and then last soak it with penetrating fluid to make the connector slippery and it will come off then. They are just a bit stubborn.

Related Dodge Questions