How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Dodge
Satisfied Customers: 1740
Experience:  ASE Master tech, 30 years exp. troubleshooter, driveability tech
2947720
Type Your Dodge Question Here...
Jerry is online now
A new question is answered every 9 seconds

Dodge: pass side stub shaft will not come out of differential

Customer Question

pass side stub shaft will not come out of differential on 2002 dodge ram 1500 4wd front i have cover off
Submitted: 1 year ago.
Category: Dodge
Customer: replied 1 year ago.
that email is***@******.***
Expert:  Richard replied 1 year ago.
Hello, I'm Richard! I'm a Chrysler, Dodge, Jeep tech with 23+ years experience & I'm going to try my best to help, so let's get started!
There is a special tool used along with a slide hammer to remove these shafts. The tool goes in the snap ring groove once the snap ring is removed. This tool isn't needed if you have the cover off, all you need is an air chisel with a blunt chisel tip.
Do you have an air hammer with a blunt chisel tip?