Greetings and welcome to the website!!!!
My name is XXXXX XXXXX X will try to help you with your question today.
Do you have a scan tool?
No I sure don't.
No problem. Have you checked the condenser fan fuse?
yes. and the relays
Ok. You probably have a bad condenser fan motor. Do you have a volt meter?
I did until it didn't work when I needed it. I can purchase another one to check voltage at fan plug.
does the relay click when you turn the a/c on?
Yes. The compressor will work for about 2 minutes when vehicle is first started. then when line gets hot it will kick on and off in 5 second intervals.
That's probably because the compressor is getting high head pressure and shuts down. Check for power to the fan motor connector at the Dark Green wire. It should have system power on and off when the relay clicks. If there is power present, check for ground on the Light Green/Black wire at the fan motor connector. If you have both the fan is bad. This is very common on these trucks. There is a bulletin from Chrysler about it, click here to view it. This refers to the fuse being open, but the problem ends up being the same. The fan draws too much amperage.
Ok. Ill try this.
No problem. Simply reply back if you require additional information and I will be happy to help with any follow up questions. Thank you and I wish you the best with your vehicle repairs. If you need more help, please use the reply tab to continue our conversation. If you do not require further assistance, kindly rate my service.
Will I have to pay again if I have more questions If there is no power at fan plug?
No. Just respond to me here and we will continue on.
OK. Thanks. Ill go buy a volt meter.
No problem. Thank you.
I have voltage at the fan both ground and hot. I will buy a fan and see if that fixes the problem. Thanks