Recent Feedback
I want to install a power chip from GForce in my 1500 dodge ram. The instructions tell me to install it in the iat/maf sensor. Is this a 2 wire plug or more, and where is this sensor located. looking at the one on the diagram it looks like a 2 wire sensor.Please advise. thank you.
Country: United StatesMake: DodgeModel: RAM 1500 4x4Year: 2007Engine: 5.7 hemi Already Tried: nothing
Welcome to JustAnswer.com! My name is DriveFast71(Ron) and I will do my best to answer all of your questions completely and accurately.
On this vehicle, the IAT sensor is a stand-alone sensor (there is no MAF Sensor on this engine). It's mounted into the front of the intake manifold air box plenum. The wire colors are:
Dark Blue/Light Green = IAT Signal ( + )
Dark Blue/Dark Green = Signal Return ( - )
Experience: 18+yrs experience. State Inspector and Dodge Diagnostics