How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ricardo hohl Your Own Question
ricardo hohl
ricardo hohl, ASE Certified Technician
Category: Dodge
Satisfied Customers: 4078
Experience:  ase master tech / and dodge ,jeep,and chrysler certified thec,with 28 years exp on general automotiv
14457476
Type Your Dodge Question Here...
ricardo hohl is online now
A new question is answered every 9 seconds

dodge durango: 5.7 hemi..p0700..same codes and runs in limp mode

Customer Question

i have an 06 dodge durango with 5.7 hemi. transmission has codes p0700 and p0750. so i replaced soleniod pac still the same codes and runs in limp mode. traded the soleniod pac in for another new one and put it on and still same problems . anyone have a solution to this problem
Submitted: 4 years ago.
Category: Dodge
Expert:  ricardo hohl replied 4 years ago.

ricardo hohl :

Hi, have you try a transmission relay< have you check the transmission solenoid fuse?

ricardo hohl :

can you check fuse # 15 at the fuse box located on the engine compartment.

JACUSTOMER-alizdod8- :

fuse is good which relay is it

ricardo hohl :

Full Size Image

ricardo hohl :

locate the relay here let me know when located do you have a test light ?

JACUSTOMER-alizdod8- :

yes i have a test light

JACUSTOMER-alizdod8- :

i tested the relay it is good

ricardo hohl :

OK LEST CHECK THE RELAY CONECTOR FOR POWER WITH THE TEST LIGHT AND TURN THE IGNITION ON SEE HOW MANY POWERS ARE PRECENT.