Recent Feedback
How to change lience plate light bulb 1992 Ram van
Country: United StatesMake: DodgeModel: Ram VanYear: 1992 Already Tried: Removed lience plate. Can not acess bulb
do you see two screws on both sides of lamps?
yes
Can see, but no way to acess.
remove those two scews and pull the lamp through the bumper to get to the connector where the bulb is, should have a connector you can pull out or twist to release.
Inposabable(sp?)to. acess screws
are they rusted?
Well yes that too, W-40ed them but there is no way to get a screw driver into the space between screws and bumper.
can you get too the connector on the back twist it to unlock and pull?
On the back of what? I don't know I will have to try that tomarrow in the daylight. How can we resume this consultation tomarrow?
behind the bumper where the wiring is you may be able to get the connector loose from the back without taking the lamp screws out, just respond later and i will see it
Thankyou
ok